PITZ - Photo Injector Test Facility - graphical user interface - documentation (DESY Zeuthen)
(table of contents v3.078)
Last modified: 23.02.2010 13:44:12

pitz_diagnostic_emsy
(revised for PITZ 1.6)

pitz_diagnostic_emsy

Component name: pitz_diagnostic_emsy
task: control the PITZ diagnostic emsy
CAF file: pitz_diagnostic_emsy.CAF
DESY: PITZ DESY
person / phone: Bert Schoeneich / 7373
called from: pitz2_diagnostic
host / server:
vmepitz06 SVR.MM4006
vmepitz03 SVR.CAMERA
Device Base Address:
PITZ.DIAG/MM4006// device
PITZ.DIAG/CAMERAS// camera and lamps
comments:
description of the variables diagnostic variables
description of the SPS-values opto22.xls
information to use screen3 form Dirk Lipka screen3.txt
problems:
if screen3, screen4 and emsy shows ERROR in the same time problem_emsy_server
contents:
  name / task / value click double click
1 mirror to the cathode X-part of emsy
(if the mirror is in the beam, his picture is red with yellow background and in (!) the beam)		    
2
status window   /STATUS
device is outside the beam is out 2
device is inside the beam is in 1
device is moving  moving 4
position error position error 3
unknown  error unknown error 0
   
4 name of the device    
5 rotate mirror state (to grid or to screen)    
6 rotate mirror to grid or screen
(the mirror picture is changeing depending the mirror is in direction to the grid or screen)
mirror is to grid

set to screen
mirror is to screen

set to grid
switch on or off  
8 faraday cup to the cathode Y-part of emsy
(if the mirror is in the beam, his picture is red with yellow background and in (!) the beam)		    
10 lamp address (name)    
11 lamp state
lamp is on

yellow

green
lamp is off

gray
   
12 lamp switch
lamp is on

SWITCH OFF
lamp is off

SWITCH ON
switch on or off  
16 electron beam line, peper pot side    
17 electron beam line, cathode side    
18 show lamps history pitz_interlock_history  
20 camera address (name)    
21 camera address description    
22 camera state    
23 camera switch
camera is on

SWITCH OFF
camera is off

SWITCH ON
switch on or off  
24 camera state
camera is on

green
camera is off

gray
   
26 rotating mirror
(this picture is changing, depends on the direction to grid or screen)		    
29 horizontal actuator (X-direction) moving emsy    
30 status number emsy moving    
31 status text emsy moving    
32 vertical actuator (Y-direction) moving emsy    
33 rotation stage (alpha - angle) moving emsy    
34 goniometric cradle (beta - angle) moving emsy    
35 show previous error do it  
36 show next error do it  
37 error text    
41 direction or angle name    
42 position upper limit    
43 current position    
44 position lower limit    
45 to move absolut (set an absolut position) change the value  
46 set to absolut position do it  
47 stop moving do it  
48 to move relativ (move by a relativ value) change the value  
49 change by relativ position do it  
50 position home value    
51 start home search procedure do it  
52 move to home (go direct to home position) do it  
53 open expert window for this device newport_motor_experet.CAF  
57 put this special position values in the "move ABSOLUT" field for this device
(only put the value in, NOT move to!)		 do it  
58 device is on this value
device is on this value

green
device is NOT on this value

gray
   
61 secure sign enable user logon  
62 logon user name    
63 disable user logon disable user logon  
64 help button this window  

Last modified: Februar 23, 2010 13:44 , Bert Schöneich, mailmailto: PITZ - webmaster