This is Info file elisp, produced by Makeinfo-1.55 from the input file elisp.texi. This version is the edition 2.3 of the GNU Emacs Lisp Reference Manual. It corresponds to Emacs Version 19.23. Published by the Free Software Foundation 675 Massachusetts Avenue Cambridge, MA 02139 USA Copyright (C) 1990, 1991, 1992, 1993, 1994 Free Software Foundation, Inc. Permission is granted to make and distribute verbatim copies of this manual provided the copyright notice and this permission notice are preserved on all copies. Permission is granted to copy and distribute modified versions of this manual under the conditions for verbatim copying, provided that the entire resulting derived work is distributed under the terms of a permission notice identical to this one. Permission is granted to copy and distribute translations of this manual into another language, under the above conditions for modified versions, except that this permission notice may be stated in a translation approved by the Foundation. Permission is granted to copy and distribute modified versions of this manual under the conditions for verbatim copying, provided also that the section entitled "GNU General Public License" is included exactly as in the original, and provided that the entire resulting derived work is distributed under the terms of a permission notice identical to this one. Permission is granted to copy and distribute translations of this manual into another language, under the above conditions for modified versions, except that the section entitled "GNU General Public License" may be included in a translation approved by the Free Software Foundation instead of in the original English.  File: elisp, Node: Init File, Next: Terminal-Specific, Prev: Start-up Summary, Up: Starting Up The Init File: `.emacs' ----------------------- When you start Emacs, it normally attempts to load the file `.emacs' from your home directory. This file, if it exists, must contain Lisp code. It is called your "init file". The command line switches `-q' and `-u' affect the use of the init file; `-q' says not to load an init file, and `-u' says to load a specified user's init file instead of yours. *Note Entering Emacs: (emacs)Entering Emacs. A site may have a "default init file", which is the library named `default.el'. Emacs finds the `default.el' file through the standard search path for libraries (*note How Programs Do Loading::.). The Emacs distribution does not come with this file; sites may provide one for local customizations. If the default init file exists, it is loaded whenever you start Emacs, except in batch mode or if `-q' is specified. But your own personal init file, if any, is loaded first; if it sets `inhibit-default-init' to a non-`nil' value, then Emacs does not subsequently load the `default.el' file. Another file for site-customization is `site-start.el'. Emacs loads this *before* the user's init file. You can inhibit the loading of this file with the option `-no-site-file'. If there is a great deal of code in your `.emacs' file, you should move it into another file named `SOMETHING.el', byte-compile it (*note Byte Compilation::.), and make your `.emacs' file load the other file using `load' (*note Loading::.). *Note Init File Examples: (emacs)Init File Examples, for examples of how to make various commonly desired customizations in your `.emacs' file. - User Option: inhibit-default-init This variable prevents Emacs from loading the default initialization library file for your session of Emacs. If its value is non-`nil', then the default library is not loaded. The default value is `nil'. - Variable: before-init-hook - Variable: after-init-hook These two normal hooks are run just before, and just after, loading of the user's init file, `default.el', and/or `site-start.el'.  File: elisp, Node: Terminal-Specific, Next: Command Line Arguments, Prev: Init File, Up: Starting Up Terminal-Specific Initialization -------------------------------- Each terminal type can have its own Lisp library that Emacs loads when run on that type of terminal. For a terminal type named TERMTYPE, the library is called `term/TERMTYPE'. Emacs finds the file by searching the `load-path' directories as it does for other files, and trying the `.elc' and `.el' suffixes. Normally, terminal-specific Lisp library is located in `emacs/lisp/term', a subdirectory of the `emacs/lisp' directory in which most Emacs Lisp libraries are kept. The library's name is constructed by concatenating the value of the variable `term-file-prefix' and the terminal type. Normally, `term-file-prefix' has the value `"term/"'; changing this is not recommended. The usual function of a terminal-specific library is to enable special keys to send sequences that Emacs can recognize. It may also need to set or add to `function-key-map' if the Termcap entry does not specify all the terminal's function keys. *Note Terminal Input::. When the name of the terminal type contains a hyphen, only the part of the name before the first hyphen is significant in choosing the library name. Thus, terminal types `aaa-48' and `aaa-30-rv' both use the `term/aaa' library. If necessary, the library can evaluate `(getenv "TERM")' to find the full name of the terminal type. Your `.emacs' file can prevent the loading of the terminal-specific library by setting the variable `term-file-prefix' to `nil'. This feature is useful when experimenting with your own peculiar customizations. You can also arrange to override some of the actions of the terminal-specific library by setting the variable `term-setup-hook'. This is a normal hook which Emacs runs using `run-hooks' at the end of Emacs initialization, after loading both your `.emacs' file and any terminal-specific libraries. You can use this variable to define initializations for terminals that do not have their own libraries. *Note Hooks::. - Variable: term-file-prefix If the `term-file-prefix' variable is non-`nil', Emacs loads a terminal-specific initialization file as follows: (load (concat term-file-prefix (getenv "TERM"))) You may set the `term-file-prefix' variable to `nil' in your `.emacs' file if you do not wish to load the terminal-initialization file. To do this, put the following in your `.emacs' file: `(setq term-file-prefix nil)'. - Variable: term-setup-hook This variable is a normal hook which Emacs runs after loading your `.emacs' file, the default initialization file (if any) and the terminal-specific Lisp file. You can use `term-setup-hook' to override the definitions made by a terminal-specific file. See `window-setup-hook' in *Note Window Systems::, for a related feature.  File: elisp, Node: Command Line Arguments, Prev: Terminal-Specific, Up: Starting Up Command Line Arguments ---------------------- You can use command line arguments to request various actions when you start Emacs. Since you do not need to start Emacs more than once per day, and will often leave your Emacs session running longer than that, command line arguments are hardly ever used. As a practical matter, it is best to avoid making the habit of using them, since this habit would encourage you to kill and restart Emacs unnecessarily often. These options exist for two reasons: to be compatible with other editors (for invocation by other programs) and to enable shell scripts to run specific Lisp programs. This section describes how Emacs processes command line arguments, and how you can customize them. - Function: command-line This function parses the command line which Emacs was called with, processes it, loads the user's `.emacs' file and displays the initial nonwarranty information, etc. - Variable: command-line-processed The value of this variable is `t' once the command line has been processed. If you redump Emacs by calling `dump-emacs', you may wish to set this variable to `nil' first in order to cause the new dumped Emacs to process its new command line arguments. - Variable: command-switch-alist The value of this variable is an alist of user-defined command-line options and associated handler functions. This variable exists so you can add elements to it. A "command line option" is an argument on the command line of the form: -OPTION The elements of the `command-switch-alist' look like this: (OPTION . HANDLER-FUNCTION) The HANDLER-FUNCTION is called to handle OPTION and receives the option name as its sole argument. In some cases, the option is followed in the command line by an argument. In these cases, the HANDLER-FUNCTION can find all the remaining command-line arguments in the variable `command-line-args-left'. (The entire list of command-line arguments is in `command-line-args'.) The command line arguments are parsed by the `command-line-1' function in the `startup.el' file. See also *Note Command Line Switches and Arguments: (emacs)Command Switches. - Variable: command-line-args The value of this variable is the list of command line arguments passed to Emacs. - Variable: command-line-functions This variable's value is a list of functions for handling an unrecognized command-line argument. Each time the next argument to be processed has no special meaning, the functions in this list are called, in the order they appear, until one of them returns a non-`nil' value. These functions are called with no arguments. They can access the command-line argument under consideration through the variable `argi'. The remaining arguments (not including the current one) are in the variable `command-line-args-left'. When a function recognizes and processes the argument in `argi', it should return a non-`nil' value to say it has dealt with that argument. If it has also dealt with some of the following arguments, it can indicate that by deleting them from `command-line-args-left'. If all of these functions return `nil', then the argument is used as a file name to visit.  File: elisp, Node: Getting Out, Next: System Environment, Prev: Starting Up, Up: System Interface Getting Out of Emacs ==================== There are two ways to get out of Emacs: you can kill the Emacs job, which exits permanently, or you can suspend it, which permits you to reenter the Emacs process later. As a practical matter, you seldom kill Emacs--only when you are about to log out. Suspending is much more common. * Menu: * Killing Emacs:: Exiting Emacs irreversibly. * Suspending Emacs:: Exiting Emacs reversibly.  File: elisp, Node: Killing Emacs, Next: Suspending Emacs, Up: Getting Out Killing Emacs ------------- Killing Emacs means ending the execution of the Emacs process. The parent process normally resumes control. The low-level primitive for killing Emacs is `kill-emacs'. - Function: kill-emacs &optional EXIT-DATA This function exits the Emacs process and kills it. If EXIT-DATA is an integer, then it is used as the exit status of the Emacs process. (This is useful primarily in batch operation; see *Note Batch Mode::.) If EXIT-DATA is a string, its contents are stuffed into the terminal input buffer so that the shell (or whatever program next reads input) can read them. All the information in the Emacs process, aside from files that have been saved, is lost when the Emacs is killed. Because killing Emacs inadvertently can lose a lot of work, Emacs queries for confirmation before actually terminating if you have buffers that need saving or subprocesses that are running. This is done in the function `save-buffers-kill-emacs'. - Variable: kill-emacs-query-functions After asking the standard questions, `save-buffers-kill-emacs' calls the functions in the list `kill-buffer-query-functions', in order of appearance, with no arguments. These functions can ask for additional confirmation from the user. If any of them returns non-`nil', Emacs is not killed. - Variable: kill-emacs-hook This variable is a normal hook; once `save-buffers-kill-emacs' is finished with all file saving and confirmation, it runs the functions in this hook.  File: elisp, Node: Suspending Emacs, Prev: Killing Emacs, Up: Getting Out Suspending Emacs ---------------- "Suspending Emacs" means stopping Emacs temporarily and returning control to its superior process, which is usually the shell. This allows you to resume editing later in the same Emacs process, with the same buffers, the same kill ring, the same undo history, and so on. To resume Emacs, use the appropriate command in the parent shell--most likely `fg'. Some operating systems do not support suspension of jobs; on these systems, "suspension" actually creates a new shell temporarily as a subprocess of Emacs. Then you would exit the shell to return to Emacs. Suspension is not useful with window systems such as X, because the Emacs job may not have a parent that can resume it again, and in any case you can give input to some other job such as a shell merely by moving to a different window. Therefore, suspending is not allowed when Emacs is an X client. - Function: suspend-emacs STRING This function stops Emacs and returns control to the superior process. If and when the superior process resumes Emacs, `suspend-emacs' returns `nil' to its caller in Lisp. If STRING is non-`nil', its characters are sent to be read as terminal input by Emacs's superior shell. The characters in STRING are not echoed by the superior shell; only the results appear. Before suspending, `suspend-emacs' runs the normal hook `suspend-hook'. In Emacs version 18, `suspend-hook' was not a normal hook; its value was a single function, and if its value was non-`nil', then `suspend-emacs' returned immediately without actually suspending anything. After the user resumes Emacs, it runs the normal hook `suspend-resume-hook'. *Note Hooks::. The next redisplay after resumption will redraw the entire screen, unless the variable `no-redraw-on-reenter' is non-`nil' (*note Refresh Screen::.). In the following example, note that `pwd' is not echoed after Emacs is suspended. But it is read and executed by the shell. (suspend-emacs) => nil (add-hook 'suspend-hook (function (lambda () (or (y-or-n-p "Really suspend? ") (error "Suspend cancelled"))))) => (lambda nil (or (y-or-n-p "Really suspend? ") (error "Suspend cancelled"))) (add-hook 'suspend-resume-hook (function (lambda () (message "Resumed!")))) => (lambda nil (message "Resumed!")) (suspend-emacs "pwd") => nil ---------- Buffer: Minibuffer ---------- Really suspend? `y' ---------- Buffer: Minibuffer ---------- ---------- Parent Shell ---------- lewis@slug[23] % /user/lewis/manual lewis@slug[24] % fg ---------- Echo Area ---------- Resumed! - Variable: suspend-hook This variable is a normal hook run before suspending. - Variable: suspend-resume-hook This variable is a normal hook run after suspending.  File: elisp, Node: System Environment, Next: User Identification, Prev: Getting Out, Up: System Interface Operating System Environment ============================ Emacs provides access to variables in the operating system environment through various functions. These variables include the name of the system, the user's UID, and so on. - Variable: system-type The value of this variable is a symbol indicating the type of operating system Emacs is operating on. Here is a table of the symbols for the operating systems that Emacs can run on up to version 19.1. `aix-v3' AIX. `berkeley-unix' Berkeley BSD. `hpux' Hewlett-Packard operating system. `irix' Silicon Graphics Irix system. `linux' The free Linux operating system. `rtu' Masscomp RTU, UCB universe. `unisoft-unix' UniSoft UniPlus. `usg-unix-v' AT&T System V. `vax-vms' VAX VMS. `xenix' SCO Xenix 386. We do not wish to add new symbols to make finer distinctions unless it is absolutely necessary! In fact, we hope to eliminate some of these alternatives in the future. We recommend using `system-configuration' to distinguish between different operating systems. - Variable: system-configuration This variable holds the three-part configuration name for the hardware/software configuration of your system, as a string. The convenient way to test parts of this string is with `string-match'. - Function: system-name This function returns the name of the machine you are running on. (system-name) => "prep.ai.mit.edu" - Function: getenv VAR This function returns the value of the environment variable VAR, as a string. Within Emacs, the environment variable values are kept in the Lisp variable `process-environment'. (getenv "USER") => "lewis" lewis@slug[10] % printenv PATH=.:/user/lewis/bin:/usr/bin:/usr/local/bin USER=lewis TERM=ibmapa16 SHELL=/bin/csh HOME=/user/lewis - Command: setenv VARIABLE VALUE This command sets the value of the environment variable named VARIABLE to VALUE. Both arguments should be strings. This function works by modifying `process-environment'; binding that variable with `let' is also reasonable practice. - Variable: process-environment This variable is a list of strings, each describing one environment variable. The functions `getenv' and `setenv' work by means of this variable. process-environment => ("l=/usr/stanford/lib/gnuemacs/lisp" "PATH=.:/user/lewis/bin:/usr/class:/nfsusr/local/bin" "USER=lewis" "TERM=ibmapa16" "SHELL=/bin/csh" "HOME=/user/lewis") - Variable: invocation-name This variable holds the program name under which Emacs was invoked. The value is a string, and does not include a directory name. - Variable: invocation-directory This variable holds the directory from which the Emacs executable was invoked, or perhaps `nil' if that directory cannot be determined. - Variable: installation-directory If non-`nil', this is a directory within which to look for the `lib-src' and `etc' subdirectories. This is non-`nil' when Emacs can't find those directories in their standard installed locations, but can find them near where the Emacs executable was found. - Function: load-average This function returns the current 1 minute, 5 minute and 15 minute load averages in a list. The values are integers that are 100 times the system load averages. (The load averages indicate the number of processes trying to run.) (load-average) => (169 48 36) lewis@rocky[5] % uptime 11:55am up 1 day, 19:37, 3 users, load average: 1.69, 0.48, 0.36 - Function: emacs-pid This function returns the process ID of the Emacs process. - Function: setprv PRIVILEGE-NAME &optional SETP GETPRV This function sets or resets a VMS privilege. (It does not exist on Unix.) The first arg is the privilege name, as a string. The second argument, SETP, is `t' or `nil', indicating whether the privilege is to be turned on or off. Its default is `nil'. The function returns `t' if successful, `nil' otherwise. If the third argument, GETPRV, is non-`nil', `setprv' does not change the privilege, but returns `t' or `nil' indicating whether the privilege is currently enabled.  File: elisp, Node: User Identification, Next: Time of Day, Prev: System Environment, Up: System Interface User Identification =================== - Function: user-login-name This function returns the name under which the user is logged in. If the environment variable `LOGNAME' is set, that value is used. Otherwise, if the environment variable `USER' is set, that value is used. Otherwise, the value is based on the effective UID, not the real UID. (user-login-name) => "lewis" - Function: user-real-login-name This function returns the user name corresponding to Emacs's real UID. This ignores the effective UID and ignores the environment variables `LOGNAME' and `USER'. - Function: user-full-name This function returns the full name of the user. (user-full-name) => "Bil Lewis" - Function: user-real-uid This function returns the real UID of the user. (user-real-uid) => 19 - Function: user-uid This function returns the effective UID of the user.  File: elisp, Node: Time of Day, Next: Timers, Prev: User Identification, Up: System Interface Time of Day =========== This section explains how to determine the current time and the time zone. - Function: current-time-string &optional TIME-VALUE This function returns the current time and date as a humanly-readable string. The format of the string is unvarying; the number of characters used for each part is always the same, so you can reliably use `substring' to extract pieces of it. However, it would be wise to count the characters from the beginning of the string rather than from the end, as additional information may be added at the end. The argument TIME-VALUE, if given, specifies a time to format instead of the current time. The argument should be a cons cell containing two integers, or a list whose first two elements are integers. Thus, you can use times obtained from `current-time' (see below) and from `file-attributes' (*note File Attributes::.). (current-time-string) => "Wed Oct 14 22:21:05 1987" - Function: current-time This function returns the system's time value as a list of three integers: `(HIGH LOW MICROSEC)'. The integers HIGH and LOW combine to give the number of seconds since 0:00 January 1, 1970, which is HIGH * 2**16 + LOW. The third element, MICROSEC, gives the microseconds since the start of the current second (or 0 for systems that return time only on the resolution of a second). The first two elements can be compared with file time values such as you get with the function `file-attributes'. *Note File Attributes::. - Function: current-time-zone &optional TIME-VALUE This function returns a list describing the time zone that the user is in. The value has the form `(OFFSET NAME)'. Here OFFSET is an integer giving the number of seconds ahead of UTC (east of Greenwich). A negative value means west of Greenwich. The second element, NAME is a string giving the name of the time zone. Both elements change when daylight savings time begins or ends; if the user has specified a time zone that does not use a seasonal time adjustment, then the value is constant through time. If the operating system doesn't supply all the information necessary to compute the value, both elements of the list are `nil'. The argument TIME-VALUE, if given, specifies a time to analyze instead of the current time. The argument should be a cons cell containing two integers, or a list whose first two elements are integers. Thus, you can use times obtained from `current-time' (see below) and from `file-attributes' (*note File Attributes::.).  File: elisp, Node: Timers, Next: Terminal Input, Prev: Time of Day, Up: System Interface Timers ====== You can set up a timer to call a function at a specified future time. - Function: run-at-time TIME REPEAT FUNCTION &rest ARGS This function arranges to call FUNCTION with arguments ARGS at time TIME. The argument FUNCTION is a function to call later, and ARGS are the arguments to give it when it is called. The time TIME is specified as a string. Absolute times may be specified in a wide variety of formats; The form `HOUR:MIN:SEC TIMEZONE MONTH/DAY/YEAR', where all fields are numbers, works; the format that `current-time-string' returns is also allowed. To specify a relative time, use numbers followed by units. For example: `1 min' denotes 1 minute from now. `1 min 5 sec' denotes 65 seconds from now. `1 min 2 sec 3 hour 4 day 5 week 6 fortnight 7 month 8 year' denotes exactly 103 months, 123 days, and 10862 seconds from now. If TIME is an integer, that specifies a relative time measured in seconds. The argument REPEAT specifies how often to repeat the call. If REPEAT is `nil', there are no repetitions; FUNCTION is called just once, at TIME. If REPEAT is an integer, it specifies a repetition period measured in seconds. - Function: cancel-timer TIMER Cancel the requested action for TIMER, which should be a value previously returned by `run-at-time'. This cancels the effect of that call to `run-at-time'; the arrival of the specified time will not cause anything special to happen.  File: elisp, Node: Terminal Input, Next: Terminal Output, Prev: Timers, Up: System Interface Terminal Input ============== This section describes functions and variables for recording or manipulating terminal input. See *Note Display::, for related functions. * Menu: * Input Modes:: Options for how input is processed. * Translating Input:: Low level conversion of some characters or events into others. * Recording Input:: Saving histories of recent or all input events.  File: elisp, Node: Input Modes, Next: Translating Input, Up: Terminal Input Input Modes ----------- - Function: set-input-mode INTERRUPT FLOW META QUIT-CHAR This function sets the mode for reading keyboard input. If INTERRUPT is non-null, then Emacs uses input interrupts. If it is `nil', then it uses CBREAK mode. If FLOW is non-`nil', then Emacs uses XON/XOFF (`C-q', `C-s') flow control for output to terminal. This has no effect except in CBREAK mode. *Note Flow Control::. The default setting is system dependent. Some systems always use CBREAK mode regardless of what is specified. The argument META controls support for input character codes above 127. If META is `t', Emacs converts characters with the 8th bit set into Meta characters. If META is `nil', Emacs disregards the 8th bit; this is necessary when the terminal uses it as a parity bit. If META is neither `t' nor `nil', Emacs uses all 8 bits of input unchanged. This is good for terminals using European 8-bit character sets. If QUIT-CHAR is non-`nil', it specifies the character to use for quitting. Normally this character is `C-g'. *Note Quitting::. The `current-input-mode' function returns the input mode settings Emacs is currently using. - Function: current-input-mode This function returns current mode for reading keyboard input. It returns a list, corresponding to the arguments of `set-input-mode', of the form `(INTERRUPT FLOW META QUIT)' in which: INTERRUPT is non-`nil' when Emacs is using interrupt-driven input. If `nil', Emacs is using CBREAK mode. FLOW is non-`nil' if Emacs uses XON/XOFF (`C-q', `C-s') flow control for output to the terminal. This value has no effect unless INTERRUPT is non-`nil'. META is non-`t' if Emacs treats the eighth bit of input characters as the meta bit; `nil' means Emacs clears the eighth bit of every input character; any other value means Emacs uses all eight bits as the basic character code. QUIT is the character Emacs currently uses for quitting, usually `C-g'. - Variable: meta-flag This variable used to control whether to treat the eight bit in keyboard input characters as the Meta bit. `nil' meant no, and anything else meant yes. This variable existed in Emacs versions 18 and earlier but no longer exists in Emacs 19; use `set-input-mode' instead.  File: elisp, Node: Translating Input, Next: Recording Input, Prev: Input Modes, Up: Terminal Input Translating Input Events ------------------------ This section describes features for translating input events into other input events before they become part of key sequences. - Variable: extra-keyboard-modifiers This variable lets Lisp programs "press" the modifier keys on the keyboard. The value is a bit mask: 1 The SHIFT key. 2 The LOCK key. 4 The CTL key. 8 The META key. Each time the user types a keyboard key, it is altered as if the modifier keys specified in the bit mask were held down. When you use X windows, the program can "press" any of the modifier keys in this way. Otherwise, only the CTL and META keys can be virtually pressed. - Variable: keyboard-translate-table This variable is the translate table for keyboard characters. It lets you reshuffle the keys on the keyboard without changing any command bindings. Its value must be a string or `nil'. If `keyboard-translate-table' is a string, then each character read from the keyboard is looked up in this string and the character in the string is used instead. If the string is of length N, character codes N and up are untranslated. In the example below, we set `keyboard-translate-table' to a string of 128 characters. Then we fill it in to swap the characters `C-s' and `C-\' and the characters `C-q' and `C-^'. Subsequently, typing `C-\' has all the usual effects of typing `C-s', and vice versa. (*Note Flow Control:: for more information on this subject.) (defun evade-flow-control () "Replace C-s with C-\ and C-q with C-^." (interactive) (let ((the-table (make-string 128 0))) (let ((i 0)) (while (< i 128) (aset the-table i i) (setq i (1+ i)))) ;; Swap `C-s' and `C-\'. (aset the-table ?\034 ?\^s) (aset the-table ?\^s ?\034) ;; Swap `C-q' and `C-^'. (aset the-table ?\036 ?\^q) (aset the-table ?\^q ?\036) (setq keyboard-translate-table the-table))) Note that this translation is the first thing that happens to a character after it is read from the terminal. Record-keeping features such as `recent-keys' and dribble files record the characters after translation. - Function: keyboard-translate FROM TO This function modifies `keyboard-translate-table' to translate character code FROM into character code TO. It creates or enlarges the translate table if necessary. - Variable: function-key-map This variable holds a keymap which describes the character sequences sent by function keys on an ordinary character terminal. This keymap uses the data structure as other keymaps, but is used differently: it specifies translations to make while reading events. If `function-key-map' "binds" a key sequence K to a vector V, then when K appears as a subsequence *anywhere* in a key sequence, it is replaced with the events in V. For example, VT100 terminals send `ESC O P' when the keypad PF1 key is pressed. Therefore, we want Emacs to translate that sequence of events into the single event `pf1'. We accomplish this by "binding" `ESC O P' to `[pf1]' in `function-key-map', when using a VT100. Thus, typing `C-c PF1' sends the character sequence `C-c ESC O P'; later the function `read-key-sequence' translates this back into `C-c PF1', which it returns as the vector `[?\C-c pf1]'. Entries in `function-key-map' are ignored if they conflict with bindings made in the minor mode, local, or global keymaps. The intent is that the character sequences that function keys send should not have command bindings in their own right. The value of `function-key-map' is usually set up automatically according to the terminal's Terminfo or Termcap entry, but sometimes those need help from terminal-specific Lisp files. Emacs comes with terminal-specific files for many common terminals; their main purpose is to make entries in `function-key-map' beyond those that can be deduced from Termcap and Terminfo. *Note Terminal-Specific::. Emacs versions 18 and earlier used totally different means of detecting the character sequences that represent function keys. - Variable: key-translation-map This variable is another keymap used just like `function-key-map' to translate input events into other events. It differs from `function-key-map' in two ways: * `key-translation-map' goes to work after `function-key-map' is finished; it receives the results of translation by `function-key-map'. * `key-translation-map' overrides actual key bindings. The intent of `key-translation-map' is for users to map one character set to another, including ordinary characters normally bound to `self-insert-command'. You can use `function-key-map' or `key-translation-map' for more than simple aliases, by using a function, instead of a key sequence, as the "translation" of a key. Then this function is called to compute the translation of that key. The key translation function receives one argument, which is the prompt that was specified in `read-key-sequence'--or `nil' if the key sequence is being read by the editor command loop. In most cases you can ignore the prompt value. If the function reads input itself, it can have the effect of altering the event that follows. For example, here's how to define `C-c h' to turn the character that follows into a Hyper character: (defun hyperify (prompt) (let ((e (read-event))) (vector (if (numberp e) (logior (lsh 1 20) e) (if (memq 'hyper (event-modifiers e)) e (add-event-modifier "H-" e)))))) (defun add-event-modifier (string e) (let ((symbol (if (symbolp e) e (car e)))) (setq symbol (intern (concat string (symbol-name symbol)))) (if (symbolp e) symbol (cons symbol (cdr e))))) (define-key function-key-map "\C-ch" 'hyperify) The `iso-transl' library uses this feature to provide a way of inputting non-ASCII Latin-1 characters.  File: elisp, Node: Recording Input, Prev: Translating Input, Up: Terminal Input Recording Input --------------- - Function: recent-keys This function returns a vector containing the last 100 input events from the keyboard or mouse. All input events are included, whether or not they were used as parts of key sequences. Thus, you always get the last 100 inputs, not counting keyboard macros. (Events from keyboard macros are excluded because they are less interesting for debugging; it should be enough to see the events which invoked the macros.) - Command: open-dribble-file FILENAME This function opens a "dribble file" named FILENAME. When a dribble file is open, each input event from the keyboard or mouse (but not those from keyboard macros) is written in that file. A non-character event is expressed using its printed representation surrounded by `<...>'. You close the dribble file by calling this function with an argument of `nil'. This function is normally used to record the input necessary to trigger an Emacs bug, for the sake of a bug report. (open-dribble-file "~/dribble") => nil See also the `open-termscript' function (*note Terminal Output::.).  File: elisp, Node: Terminal Output, Next: Special Keysyms, Prev: Terminal Input, Up: System Interface Terminal Output =============== The terminal output functions send output to the terminal or keep track of output sent to the terminal. The variable `baud-rate' tells you what Emacs thinks is the output speed of the terminal. - Variable: baud-rate This variable's value is the output speed of the terminal, as far as Emacs knows. Setting this variable does not change the speed of actual data transmission, but the value is used for calculations such as padding. It also affects decisions about whether to scroll part of the screen or repaint--even when using a window system, (We designed it this way despite the fact that a window system has no true "output speed", to give you a way to tune these decisions.) The value is measured in baud. If you are running across a network, and different parts of the network work at different baud rates, the value returned by Emacs may be different from the value used by your local terminal. Some network protocols communicate the local terminal speed to the remote machine, so that Emacs and other programs can get the proper value, but others do not. If Emacs has the wrong value, it makes decisions that are less than optimal. To fix the problem, set `baud-rate'. - Function: baud-rate This function returns the value of the variable `baud-rate'. In Emacs versions 18 and earlier, this was the only way to find out the terminal speed. - Function: send-string-to-terminal STRING This function sends STRING to the terminal without alteration. Control characters in STRING have terminal-dependent effects. One use of this function is to define function keys on terminals that have downloadable function key definitions. For example, this is how on certain terminals to define function key 4 to move forward four characters (by transmitting the characters `C-u C-f' to the computer): (send-string-to-terminal "\eF4\^U\^F") => nil - Command: open-termscript FILENAME This function is used to open a "termscript file" that will record all the characters sent by Emacs to the terminal. It returns `nil'. Termscript files are useful for investigating problems where Emacs garbles the screen, problems that are due to incorrect Termcap entries or to undesirable settings of terminal options more often than to actual Emacs bugs. Once you are certain which characters were actually output, you can determine reliably whether they correspond to the Termcap specifications in use. See also `open-dribble-file' in *Note Terminal Input::. (open-termscript "../junk/termscript") => nil  File: elisp, Node: Special Keysyms, Next: Flow Control, Prev: Terminal Output, Up: System Interface System-Specific X11 Keysyms =========================== To define system-specific X11 keysyms, set the variable `system-key-alist'. - Variable: system-key-alist This variable's value should be an alist with one element for each system-specific keysym. An element has this form: `(CODE . SYMBOL)', where CODE is the numeric keysym code (not including the "vendor specific" bit, 1 << 28), and SYMBOL is the name for the function key. For example `(168 . mute-acute)' defines a system-specific key used by HP X servers whose numeric code is (1 << 28) + 168. It is not a problem if the alist defines keysyms for other X servers, as long as they don't conflict with the ones used by the X server actually in use.  File: elisp, Node: Flow Control, Next: Batch Mode, Prev: Special Keysyms, Up: System Interface Flow Control ============ This section attempts to answer the question "Why does Emacs choose to use flow-control characters in its command character set?" For a second view on this issue, read the comments on flow control in the `emacs/INSTALL' file from the distribution; for help with Termcap entries and DEC terminal concentrators, see `emacs/etc/TERMS'. At one time, most terminals did not need flow control, and none used `C-s' and `C-q' for flow control. Therefore, the choice of `C-s' and `C-q' as command characters was uncontroversial. Emacs, for economy of keystrokes and portability, used nearly all the ASCII control characters, with mnemonic meanings when possible; thus, `C-s' for search and `C-q' for quote. Later, some terminals were introduced which required these characters for flow control. They were not very good terminals for full-screen editing, so Emacs maintainers did not pay attention. In later years, flow control with `C-s' and `C-q' became widespread among terminals, but by this time it was usually an option. And the majority of users, who can turn flow control off, were unwilling to switch to less mnemonic key bindings for the sake of flow control. So which usage is "right", Emacs's or that of some terminal and concentrator manufacturers? This question has no simple answer. One reason why we are reluctant to cater to the problems caused by `C-s' and `C-q' is that they are gratuitous. There are other techniques (albeit less common in practice) for flow control that preserve transparency of the character stream. Note also that their use for flow control is not an official standard. Interestingly, on the model 33 teletype with a paper tape punch (which is very old), `C-s' and `C-q' were sent by the computer to turn the punch on and off! GNU Emacs version 19 provides a convenient way of enabling flow control if you want it: call the function `enable-flow-control'. - Function: enable-flow-control This function enables use of `C-s' and `C-q' for output flow control, and provides the characters `C-\' and `C-^' as aliases for them using `keyboard-translate-table' (*note Translating Input::.). You can use the function `enable-flow-control-on' in your `.emacs' file to enable flow control automatically on certain terminal types. - Function: enable-flow-control-on &rest TERMTYPES This function enables flow control, and the aliases `C-\' and `C-^', if the terminal type is one of TERMTYPES. For example: (enable-flow-control-on "vt200" "vt300" "vt101" "vt131") Here is how `enable-flow-control' does its job: 1. It sets CBREAK mode for terminal input, and tells the operating system to handle flow control, with `(set-input-mode nil t)'. 2. It sets up `keyboard-translate-table' to translate `C-\' and `C-^' into `C-s' and `C-q' were typed. Except at its very lowest level, Emacs never knows that the characters typed were anything but `C-s' and `C-q', so you can in effect type them as `C-\' and `C-^' even when they are input for other commands. *Note Translating Input::. If the terminal is the source of the flow control characters, then once you enable kernel flow control handling, you probably can make do with less padding than normal for that terminal. You can reduce the amount of padding by customizing the Termcap entry. You can also reduce it by setting `baud-rate' to a smaller value so that Emacs uses a smaller speed when calculating the padding needed. *Note Terminal Output::.  File: elisp, Node: Batch Mode, Prev: Flow Control, Up: System Interface Batch Mode ========== The command line option `-batch' causes Emacs to run noninteractively. In this mode, Emacs does not read commands from the terminal, it does not alter the terminal modes, and it does not expect to be outputting to an erasable screen. The idea is that you specify Lisp programs to run; when they are finished, Emacs should exit. The way to specify the programs to run is with `-l FILE', which loads the library named FILE, and `-f FUNCTION', which calls FUNCTION with no arguments. Any Lisp program output that would normally go to the echo area, either using `message' or using `prin1', etc., with `t' as the stream, goes instead to Emacs's standard output descriptor when in batch mode. Thus, Emacs behaves much like a noninteractive application program. (The echo area output that Emacs itself normally generates, such as command echoing, is suppressed entirely.) - Variable: noninteractive This variable is non-`nil' when Emacs is running in batch mode.  File: elisp, Node: Display, Next: Calendar, Prev: System Interface, Up: Top Emacs Display ************* This chapter describes a number of features related to the display that Emacs presents to the user. * Menu: * Refresh Screen:: Clearing the screen and redrawing everything on it. * Screen Size:: How big is the Emacs screen. * Truncation:: Folding or wrapping long text lines. * The Echo Area:: Where messages are displayed. * Selective Display:: Hiding part of the buffer text. * Overlay Arrow:: Display of an arrow to indicate position. * Temporary Displays:: Displays that go away automatically. * Overlays:: Use overlays to highlight parts of the buffer. * Faces:: A face defines a graphics appearance: font, color, etc. * Blinking:: How Emacs shows the matching open parenthesis. * Inverse Video:: Specifying how the screen looks. * Usual Display:: The usual conventions for displaying nonprinting chars. * Display Tables:: How to specify other conventions. * Beeping:: Audible signal to the user. * Window Systems:: Which window system is being used.  File: elisp, Node: Refresh Screen, Next: Screen Size, Up: Display Refreshing the Screen ===================== The function `redraw-frame' redisplays the entire contents of a given frame. *Note Frames::. - Function: redraw-frame FRAME This function clears and redisplays frame FRAME. Even more powerful is `redraw-display': - Command: redraw-display This function clears and redisplays all visible frames. Normally, suspending and resuming Emacs also refreshes the screen. Some terminal emulators record separate contents for display-oriented programs such as Emacs and for ordinary sequential display. If you are using such a terminal, you might want to inhibit the redisplay on resumption. *Note Suspending Emacs::. - Variable: no-redraw-on-reenter This variable controls whether Emacs redraws the entire screen after it has been suspended and resumed. Non-`nil' means yes, `nil' means no. Processing user input takes absolute priority over redisplay. If you call these functions when input is available, they do nothing immediately, but a full redisplay does happen eventually--after all the input has been processed.  File: elisp, Node: Screen Size, Next: Truncation, Prev: Refresh Screen, Up: Display Screen Size =========== The screen size functions report or tell Emacs the height or width of the terminal. When you are using multiple frames, they apply to the selected frame (*note Frames::.). - Function: screen-height This function returns the number of lines on the screen that are available for display. (screen-height) => 50 - Function: screen-width This function returns the number of columns on the screen that are available for display. (screen-width) => 80 - Function: set-screen-height LINES &optional NOT-ACTUAL-SIZE This function declares that the terminal can display LINES lines. The sizes of existing windows are altered proportionally to fit. If NOT-ACTUAL-SIZE is non-`nil', then Emacs displays LINES lines of output, but does not change its value for the actual height of the screen. (Knowing the correct actual size may be necessary for correct cursor positioning.) Using a smaller height than the terminal actually implements may be useful to reproduce behavior observed on a smaller screen, or if the terminal malfunctions when using its whole screen. If LINES is different from what it was previously, then the entire screen is cleared and redisplayed using the new size. This function returns `nil'. - Function: set-screen-width COLUMNS &optional NOT-ACTUAL-SIZE This function declares that the terminal can display COLUMNS columns. The details are as in `set-screen-height'.  File: elisp, Node: Truncation, Next: The Echo Area, Prev: Screen Size, Up: Display Truncation ========== When a line of text extends beyond the right edge of a window, the line can either be continued on the next screen line, or truncated to one screen line. The additional screen lines used to display a long text line are called "continuation" lines. Normally, a `$' in the rightmost column of the window indicates truncation; a `\' on the rightmost column indicates a line that "wraps" or is continued onto the next line. (The display table can specify alternative indicators; see *Note Display Tables::.) Note that continuation is different from filling; continuation happens on the screen only, not in the buffer contents, and it breaks a line precisely at the right margin, not at a word boundary. *Note Filling::. - User Option: truncate-lines This buffer-local variable controls how Emacs displays lines that extend beyond the right edge of the window. The default is `nil', which specifies continuation. If the value is non-`nil', then these lines are truncated. If the variable `truncate-partial-width-windows' is non-`nil', then truncation is always used for side-by-side windows (within one frame) regardless of the value of `truncate-lines'. - Variable: default-truncate-lines This variable is the default value for `truncate-lines', for buffers that do not have local values for it. - User Option: truncate-partial-width-windows This variable controls display of lines that extend beyond the right edge of the window, in side-by-side windows (*note Splitting Windows::.). If it is non-`nil', these lines are truncated; otherwise, `truncate-lines' says what to do with them. You can override the images that indicate continuation or truncation with the display table; see *Note Display Tables::.